Company News
2024.06.19 🌟 Summer Sales at DD Fasteners! 🌟 Self Drilling Screw / Tapping Screw
Why Choose Our Heavy Duty Self Drilling Metal Screws?
- Versatile Applications: Ideal for joining metal roofing panels to steel frame buildings.
- Superior Performance: The No.5 drill tip ensures efficient self-drilling in heavy gauge steel up to 12.5mm.
- Complete with EPDM Washer: Each screw comes with a 16mm EPDM rubber washer for secure sealing.
- Unmatched Durability: Our screws are fire and corrosion-resistant, protected by the Elementech corrosion-resistant coating, and have been salt spray tested for 1000 hours.
- Compliance and Safety: Our products meet EU Safety, Health, and Environmental requirements.
2024.06.17 DD Fasteners: Leading Manufacturer of Heavy Section Hex Head Tek Screws
Introducing the 5.5 x 38mm Heavy Section Hex Head Tek Screw from DD Fasteners – the epitome of strength, precision, and reliability. Engineered for demanding applications, these screws promise exceptional performance every time.
2024.06.15 DD Fasteners: RAL Roofing Wood Screws

RAL ROOFING WOOD SCREWS FEATURES
- Manufactured and compliant to Australian Standards AS 3566.
- Cat 5 rated for use in Cat 3,4 or 5 areas.
- B8 coating is one of the highest corrosion protections available.
- Type 17 razor slash point for fast insertion and self centred start.
- Colour matched to the range of RAL colours.
- Parallel thread providing a constant and even clamping load.
- Designed for use with power drivers due to heavy duty high strength shanks.
- Thread cutting profile with a coarse tapping thread for rapid installation.
- Fluted to clear drilling debris and minimise timber splitting.
- Suitable for self drilling through thin steel sheeting for roofing and cladding applications.
- All 12g screws are 5/16" drive, all 14g screws are 3/8" drive
2024.06.14 DD Fasteners - World's Best Fibre Cement Screws

Features :
- No2 Square drive for consistent high torque driving, 1 x 50mm driver bit free in each box/pack
- Head-stamped with circular key to allow bonding of finishing materials, adhesives, plaster, fillers etc.
- Coarse Hi-lo threads for maximum pull-up with high pull out resistance and the flexibilty of use in varying materials e.g. timber, steel, plastics etc.
- Screw Armour ceramic coated lasting 6 times longer than galvanising for maximum corrosion protection in damp, wet or undertile areas and suitable for use in treated timbers.
2024.06.13 DD Fasteners - Wing Tip- Roofing Screw

WING TIP SCREW FEATURES
- Self drilling hardened points for fast insertion and self centred start.
- No2 square drive for a positive connection avoiding 'tear out'.
- Hex 5 drive for 14g Wing Tip metal drillers.
- Parallel thread providing a constant and even clamping load.
- Heavy duty high strength shanks designed for use with power drivers.
- Thread cutting profile with a coarse tapping thread for rapid installation.
2024.06.12 Boost Your Construction Efficiency with DD Fasteners’ Premium Self-Drilling Screws!

Tek 5 and Tek 4 screws work well for a variety of applications that are metal to metal or wood to metal, like:
- Electrical industry.
- Roofing.
- Machinery.
- Carpentry.
- Steel studs.
- Outdoor and exterior.
2024.06.11 : Unlock Unmatched Performance with DD Fasteners' CSK & Truss Head Self-Drilling Screws

DD Fasteners self drilling screw connect components in one work step: they drill, form the thread, and fasten. This reduces the installation time, saves tool changes and costs for drills. Self-drilling screws save you time and effort by drilling their own holes, creating reusable threads, and fastening material in a single operation.
Material
A4 Stainless Steel—Our most corrosion-resistant stainless steel, it has excellent resistance to chemicals and saltwater and may be mildly magnetic.
A2 Stainless Steel—Has good chemical resistance and may be mildly magnetic.
410 Stainless Steel—Stronger and more wear-resistant than A4 and A2 stainless steel, it is mildly chemical resistant and magnetic. Not for use with aluminum.
Steel—This general-purpose metal is often plated with zinc for corrosion resistance in wet environments.
Finish
Zinc Plated and Black Zinc–Plated—Provide corrosion resistance in wet environments.
Rupert Coated—Resists corrosion better than zinc plating and minimizes reactions between dissimilar metals. It is extremely thin (about 15-20 microns) and acts as a lubricant in addition to providing anti-corrosion properties.
2023.06.10 DD Fasteners: New Product Overview Bonded Washer with EPDM / PVC Washer / EPDM Washer for Roofing Screw
-

Aluminium Bonded Washers are for metal roof applications that require high strength, UV, ozone and corrosion resistance in rust proof conditions. Also used in the insulated panel industry - Applications: Suitable for crest fixing both corrugated, square rib & broad sheet roof profiles and Insulated panels
- To suit screw size: To suit 14g (6.3mm) self drilling metal and timber screws
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Material / Coating: Made from high quality non-conductive EPDM rubber material with a aluminium backing that is ozone and UV resistant and high strength
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and where possible to the relevant standard, however they should only be used as a guide. If you have an exact requirement or you see a problem with our specifications please contact us directly
- Dimensions: Our stock is sourced from various suppliers, differences can exist such as the inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
2024.06.09 DD Fasteners Roofing Screw: Your Ultimate Roofing Solution

Benefits of Hex Cap Screws
With their hexagonal shape, hex cap screws allow for greater torque than that traditional screws with a circular head. You can't install or remove them using a standard screwdriver bit like a flat head or Philip's head. Instead, you'll have to use a ratchet and socket combination.
Benefits of Self Drilling Screws
A Self-drilling screw is, essentially a self-tapping screw with the added feature of a drill point end. Self-drilling screws eliminate the need for a pre-drilled pilot hole as they perform the drilling, tapping, and fastening in one action. Hardened steel fixings are generally used when fixing metal to metal or metal to timber.
2024.06.08 Self Drilling Screw / Tapping Screw : ISO category classification C3

Corrosion Resistant Fasteners
Corrosion-Proof Fasteners Stand Up to the World's Harshest Environments
Rigorously tested per the global standards as ASTM B117, ASTM B695, DIN50018, DIN50021 and AS3566.2 for salt spray, acidic atmosphere, humidity, and other extreme exposures, our fasteners thrive where lesser products quickly corrodeto protect critical equipment investments.
DD Fasteners: Your Trusted Partner for Fasteners
DD Fasteners Co., Ltd. has recently announced the launch of a new line of high-quality stitching screws, designed to cater to a wide range of industrial and commercial applications. These stitching screws are available in various coatings and finishes, including black phosphate and zinc plated, making them ideal for use in drywall, metal studs, steel framing, wood, plasterboard, and sheetrock. The company's stitching screws are known for their durability, precision, and rust resistance, and are suitable for heavy-duty and fine thread applications. DD Fasteners Co., Ltd. is a leading supplier and manufacturer of stitching screws, offering custom solutions for various industries. With a focus on high-quality and affordable products, the company aims to meet the diverse needs of its customers
2024.06.06 DD Fasteners' Drywall Self-Drilling Screws
Applications:
Used to fix a wide variety of DDF Boards to metal studs. Please note the below when using Siniat Self Drilling Screws:
Screws to be located a minimum of 10mm from bound edges and 13mm from cut edges * Screw location to be a minimum of 3mm from the edge of the metal stud * Screw depth into the metal stud must be a minimum of 10mm
Benefits:
- For use with thick gauge metal studwork (over 0.7mm thick) * Fine threaded screw * Phillips head * Carbon steel screws with Zinc Coating * Manufactured to BS EN 14566


Send Email
+8613230079551

