Head Type: Pancake,Serrated flat head
Point Type: Needle
Material: Carbon Steel
Finish: Class 3 Ruspert coating for screws

The Serrated flat head Frame Screw is designed for connecting wall frame components together through pre-punched holes.
Suitable for use in the assembly of:
Steel Wall Frames
Steel Roof Trusses
Steel Floor Trusses

Frame screws are Use for all steel trusses and steel wall frames with pre-punched holes.The taptite triobular thread reduces friction in its thread forming action. Provides resistance to vibrational loosening and has a superior holding strength.

Underhead serrations – serration lock underhead will provide resistance to loosening

Ruspert coating provides excellent protection in steel framing and reduces torque resistance during installation.High performance corrosion coating specifically formulated for steel framing.

A)  FEATURES AND BENEFITS

1. Underhead serrations – serration lock underhead will provide resistance to loosening
2. M6 thread – high shear and torsional strength values
3. Needle point – A fast way to align screw with pre-punched holes
4. P3 drive – extra control with large driver bit ensures a solid connection between steel

B) INSTALLATION INSTRUCTIONS

• 1. Use a #3 Phillips Driver Bit
• 2. Use mains or cordless screw driver with a speed up to 2,500rpm
• 3. Fit the #3 Phillips Driver Bit into the screw and place it in pre-punchedhole fastening position
• 4. Recommended punch hole size: 5mm
• 5. Apply consistent firm pressure on the screwdriver until the screw has fastened. DO NOT OVERTIGHTEN.
• 6. Clamping Torque – 3.04Nm into 2 x 075mm pieces of Truecore steel
• 7. Strip Torque – 8.32Nm into 2 x 0.75Nm pieces of Truecore steel
• 
• Stay tuned , Cheers Have a great weekend